Skip to main content

C-04 Waste classification

Aspect C-04 Waste classification

Description
How should output wastes be classified: as e.g. inert, non-hazardous, hazardous?
Related
Study Goal
☒ stand-alone LCA ☒ comparative assertion
Related
Study Phase
☒
Goal and scope definition
☐
Life cycle inventory analysis (LCI)
☐
Life cycle impact assessment (LCIA)
☐
Interpretation
☐
Reporting
Relevant for
New buildings

Existing buildings

Construction products

Screening LCA

Simplified LCA

Complete LCA

Provisions
The model should reflect the real situation. The classification into three types – hazardous, non-hazardous and inert waste – should be performed according to article 4 of the Landfill Waste Directive 1999/31. This aspect is likely to be predefined in every national EPD programme scheme, and may be adopted within product LCA studies that are made within the same context.

Rules from
EN 15804 6.3.4.6 End-of-life stage
6.3.8 Developing product scenarios
7.2.5 Other environmental information describing different waste categories and output flows
7.3 Scenarios and additional technical information
7.3.4 End of life

Guidance

Current practice should be used for scenarios. Specific models for waste treatment may be relevant for particular materials, to take account of emissions, or of the amount of energy recovery. EN 15804 requires that the total amounts of inert, non-hazardous and hazardous waste, measured at the system boundary, be reported. All waste covered by the Waste Framework Directive should be classified within the European Waste Classification system, and it should be possible to report these figures.

Lifecycle stage: C (all modules), Related study objective: comparative assertion, Related study objective: stand-alone LCA, Related study phase: Goal and scope definition, Study type: Complete LCA, Study type: Screening LCA, Study type: Simplified LCA