Skip to main content

B-10 Assessment of different repair and maintenance alternatives

Aspect B-10 Assessment of different repair and maintenance alternatives

Description
The performance of a product often depends on maintenance. However, several maintenance schemes may be developed for the same product, depending on the owner’s requirements and the building specifics. In the case of the repair module, several repair alternatives may also be considered, notably for an existing building.
Related
study objective
☒ stand-alone LCA ☒ comparative assertion
Related
study phase
☒
goal and scope definition
☐
inventory analysis (LCI)
☐
impact assessment (LCIA)
☐
interpretation
☐
reporting
Relevant for
new buildings

existing buildings

construction products

screening LCA

simplified LCA

complete LCA

Provisions
When considering and comparing several repair or maintenance scenarios, the following items should be taken into account and documented:

  • Any deviation from the scenario contained in EPDs should be justified and documented.
  • Overall repair scenarios should be consistent with the RSL of each component or building part, notably by referring to the ISO 15686 series [ISO 15686].

The consequences of the repair scenario should be studied (the influence on future maintenance and replacement scenarios, and the impacts on building performance).


Rules from
EN 15978
  • 7.4.4.1 General
  • 7.4.4.4 Boundary for repair (module B3)
  • 8.3 Time related characteristics
  • 8.6.3 Scenarios for maintenance, repair, replacement
EN 15804
  • 6.3.3. Reference service life
  • 6.3.4.4.2 – B3 Reparation
  • 7.3.3.1 B1–B5 use stage related to the building fabric
  • Annex A

Guidance
The overall repair scenario should be consistent with respect to the building structure (e.g. replacement of coating is mandatory if repairing the support).


Figure 17: Replacement cycles [EN 15804]

The boundaries of the repair and maintenance modules should be similar in the case of comparison (refer to ‘Repair with complete LCA’ for further guidance). It is recommended that sensitivity analysis be used when comparing different scenarios.

Lifecycle stage: B (all modules), Lifecycle stage: B3, Related study objective: comparative assertion, Related study objective: stand-alone LCA, Related study phase: Goal and scope definition, Study type: Complete LCA, Study type: Screening LCA, Study type: Simplified LCA